Menu

AutoKinetics Model 55 Conveyor Belt Systems

Light duty low profile center-drive and end-drive conveyors designed for long life, maximum performance and low maintenance.
Some of the standard features include:
  • Structural Aluminum Extrusion Framing: The backbone of our conveyor, quality structural aluminum framing allows for maximum rigidity and a high degree of flexibility in design and addition of bolt on features
  • High Wear Belt running Surface: 16 Ga. stainless steel wearplates provide years of trouble free low maintenance run time
  • Sealed Bearings: Quality permanently sealed and lubricated deep groove ball bearings keep your Conveyor running with no maintenance for the life of the bearing
  • Machined Bolt-On Components: Aluminum anodized conveyor components machined to provide high quality long lasting hassle free service
  • Crowned Pulleys: Precision machined 50mm diameter pulleys allow for easy belt tracking.

Explore the Model 55 Options

Light duty low profile center drive conveyors are suited for applications where it may not be possible to adjust the end blocks for belt tensioning or may require a tighter tolerance on end to end length. Moveable center drives can be moved to any point along the conveyor frame to accommodate interferences by merely loosening a few fasteners and sliding into position

Center Drive Specifications:

12 Standard widths available: 40mm, 80mm, 120mm, 160mm, 200mm, 240mm, 280mm, 320mm, 400mm, 480mm, 560mm, 640mm
Lengths: 660mm – 6000mm in 1mm increments
Speeds: up to 350 FPM* possible
Pulley Diameter: 50mm
Load Capacity: up to 68kg /150lbs**

* Actual Conveyor speeds are determined by number of variables including the torque limitations of the desired drive types selected.
** Load capacities may also be limited by conveyor width

Center Drive – Drive Options:

Side Mount Center Drive: AC Fixed Speed motor

  • Speeds available: 4 – 93 FPM
  • Voltages available: 115/1/60, 208-230/3/60, 460/3/60

Side Mount Center Drive: AC Variable Speed motor

  • Speeds available: 2 at 40Hz to 130 FPM at 90 Hz
  • Voltages available: 230/3/60, 460/3/60
Note: Motor can run variable speed. Only operate between 40-90Hz.
*Control for variable speed sold separately.

Bottom Mount Center Drive: AC Fixed Speed motor

  • Speeds available: 3 – 175 FPM
  • Voltages available: 115/1/60, 230/460/3/60

Bottom Mount Center Drive: AC or DC Variable Speed motor

  • Speeds available: .1 – 260 FPM
  • Voltages available: 130 VDC or 230/460/3/60VAC, AC units inverter duty and rated for 10-90 Hz operation.
*Controllers sold separately.
Try our new conveyor configurator! Choose your desired conveyor options then download detailed specifications for a conveyor tailored to your specific needs. After you’ve configured your conveyor, you will be able to download a product datasheet in PDF format that includes a live 3D model, product specifications and ordering information for your conveyor. You will also be able to download a working 3D solid model in any of 150 different CAD file formats to incorporate into your machine layout.

Back to Top

Light duty low profile end drive conveyors designed for long life, maximum performance and low maintenance.

End Drive Specifications

  • 12 Standard widths available: 40mm, 80mm, 120mm, 160mm, 200mm, 240mm, 280mm, 320mm, 400mm, 480mm, 560mm, 640mm
  • Lengths: 380mm – 3048mm in 1mm increments
  • Speeds: up to 350 FPM* possible
  • Pulley Diameter: 50mm
  • Load Capacity: up to 68kg /150lbs**
  • Drive Options: Available as AC with a large selection of speeds with or without controls to suit your application
* Actual Conveyor speeds are determined by a number of variables including torque limitations of the desired drive types selected.
** Load capacities may also be limited by conveyor width

End Drive – Drive Options

Side Mount End Drive: Brushless DC Variable Speed motor

Speeds available: 1-68 FPM. Includes motor controller for speed adjustment

Side Mount End Drive: AC Fixed Speed motor

  • Speeds available: 4 – 93 FPM
  • Voltages available: 115/1/60, 208-230/3/60, 460/3/60

Side Mount End Drive:AC Variable Speed motor

  • Speeds available: 2 at 40Hz to 130 FPM at 90 Hz
  • Voltages available: 230/3/60, 460/3/60
Note: Motorcan run variable speed. Only operate between 40-90Hz.
*Control for variable speed sold separately.

Top Mount Driven End Drive:AC Fixed Speed motor

  • Speeds available: 3 – 175 FPM
  • Voltages available: 115/1/60, 230/460/3/60

Top Mount End Drive: AC or DC Variable Speed motor

  • Speeds available: .1 – 260 FPM
  • Voltages available: 130 VDC or 230/460/3/60VAC
*Control for variable speed sold separately.

Bottom Mount End Drive: AC Fixed Speed motor

  • Speeds available: 3 – 175 FPM
  • Voltages available: 115/1/60, 230/460/3/60

Bottom Mount End Drive: AC or DC Variable Speed motor

  • Speeds available: .1 – 260 FPM
  • Voltages available: 130 VDC or 230/460/3/60VAC

Back to Top

Try our new conveyor configurator! Choose your desired conveyor options then download detailed specifications for a conveyor tailored to your specific needs. After you’ve configured your conveyor, you will be able to download a product datasheet in PDF format that includes a live 3D model, product specifications and ordering information for your conveyor. You will also be able to download a working 3D solid model in any of 150 different CAD file formats to incorporate into your machine layout.
High quality urethane belt selections available in low, medium and high friction covers are standard. Doesn’t meet your requirements? Contact us. We offer belting with many different textures and materials to suit your application. We would be happy to help determine a belt that will fit your application needs, including cleated end drive belts for part elevation.

Model 55 Low Friction Conveyor Belting

  • Top Side Material: Urethane impregnated polyester
  • Bottom Side Material: Urethane impregnated polyester
  • Maximum Operating Temp: 176℉ F (80℉ C)
  • Chemical Resistance: Good
  • FDA Approved: Yes

More Details

  • Anti-Static: Yes
  • Coefficient of Friction: Very Low
  • Color: Off White
  • Cleats: No
  • Splice Types: Endless, Plastic Lace, Stainless Steel Clipper Lace
  • Applications: Packaging, Accumulation
Low Friction Urethane Conveyer Belting - Blue

  • Top Side Material: Urethane impregnated polyester
  • Bottom Side Material: Urethane impregnated polyester
  • Maximum Operating Temp: 176℉ F (80℉ C)
  • Chemical Resistance: Good
  • FDA Approved: Yes

More Details

  • Anti-Static: Yes
  • Coefficient of Friction: Very Low
  • Color: Blue
  • Cleats: No
  • Splice Types: Endless, Plastic Lace, Stainless Steel Clipper Lace
  • Applications: Packaging, Accumulation
Low Friction Urethane Conveyer Belting - Green

  • Top Side Material: Urethane
  • Bottom Side Material:Polyester
  • Maximum Operating Temp: 194℉ F (90℉ C)
  • Chemical Resistance: Good
  • FDA Approved: Yes

More Details

  • Anti-Static: Yes
  • Coefficient of Friction: Low
  • Color: Green
  • Cleats: No
  • Splice Types: Endless, Plastic Lace, Stainless Steel Clipper Lace
  • Applications: General Conveying, Accumulation
Low Friction Urethane Conveyer Belting -White

  • Top Side Material: Urethane
  • Bottom Side Material: Polyester
  • Maximum Operating Temp: 176℉ F (80℉ C)
  • Chemical Resistance: Good
  • FDA Approved: Yes

More Details

  • Anti-Static: Yes
  • Coefficient of Friction: Low
  • Color: Green
  • Cleats: No
  • Splice Types: Endless, Plastic Lace, Stainless Steel Clipper Lace
  • Applications: General Conveying, Accumulation

Model 55 Medium Friction Conveyor Belting

Medium Friction Urethane Conveyer Belting - White

  • Top Side Material: Urethane
  • Bottom Side Material: Polyester
  • Maximum Operating Temp: 176℉ F (80℉ C)
  • Chemical Resistance: Good
  • FDA Approved: Yes

More Details

  • Anti- Static: No
  • Coefficient of Friction: Medium
  • Color: White
  • Cleats: Yes
  • Cleat Size: 3mm wide x 20mm, 30mm, 40mm and 60mm
  • Cleat Color: White or Blue
  • Splice Types: Endless, Plastic Lace, Stainless Steel Clipper Lace
  • Applications: General Conveying
Medium Friction Urethane Conveyer Belting - Black

  • Top Side Material: Abrasion Resistant Urethane
  • Bottom Side Material: Polyester
  • Maximum Operating Temp: 176℉ F (80℉ C)
  • Chemical Resistance: Good
  • FDA Approved: No

More Details

  • Anti-Static: Yes
  • Coefficient of Friction: Medium
  • Color: Black
  • Cleats: Yes
  • Cleat Size: 3mm wide x 20mm, 30mm, 40mm and 60mm
  • Cleat Color: White or Blue
  • Splice Types: Endless, Plastic Lace, Stainless Steel Clipper Lace
  • Applications: General Conveying
Medium Friction Urethane Conveyer Belting - Blue

  • Top Side Material: Urethane
  • Bottom Side Material: Polyester
  • Maximum Operating Temp: 176℉ F (80℉ C)
  • Chemical Resistance: Good
  • FDA Approved: Yes

More Details

  • Anti- Static: Yes
  • Coefficient of Friction: Medium
  • Color: Black
  • Cleats: Yes
  • Cleat Size: 3mm wide x 20mm, 30mm, 40mm and 60mm
  • Cleat Color: White or Blue
  • Splice Types: Endless, Plastic Lace, Stainless Steel Clipper Lace
  • Applications: General Conveying

Model 55 Friction Conveyor Belting

 Friction Urethane Conveyor Belting - White

  • Top Side Material: Urethane
  • Bottom Side Material: Polyester
  • Maximum Operating Temp: 176℉ F (80℉ C)
  • Chemical Resistance: Good
  • FDA Approved: Yes

More Details

  • Anti-Static: No
  • Coefficient of Friction: High
  • Color: White
  • Cleats: Yes
  • Cleat Size: 3mm wide x 20mm, 30mm, 40mm and 60mm
  • Cleat Color: White or Blue
  • Splice Types: Endless, Plastic Lace, Stainless Steel Clipper Lace
  • Applications: General Conveying, Slight Incline or Decline
 Friction Urethane Conveyor Belting - Blue

  • Top Side Material: Urethane Structured
  • Bottom Side Material: Polyester
  • Maximum Operating Temp: 176℉ F (80℉ C)
  • Chemical Resistance: Good
  • FDA Approved: Yes

More Details

  • Anti-Static: No
  • Coefficient of Friction: High
  • Color: Blue
  • Cleats: Yes
  • Cleat Size: 3mm wide x 20mm, 30mm, 40mm and 60mm
  • Cleat Color: White or Blue
  • Splice Types: Endless, Plastic Lace, Stainless Steel Clipper Lace
  • Applications: General Conveying, Slight Incline or Decline

Back to Top

Try our new conveyor configurator! Choose your desired conveyor options then download detailed specifications for a conveyor tailored to your specific needs. After you’ve configured your conveyor, you will be able to download a product datasheet in PDF format that includes a live 3D model, product specifications and ordering information for your conveyor. You will also be able to download a working 3D solid model in any of 150 different CAD file formats to incorporate into your machine layout.

Floor Stands with Leveling Feet or Casters

Model 55 Conveyor Systems Floor Stands

Leg Sets

Available in heights from 350mm – 1524mm with three base options:
Three types of feet are available:

Mounting Angles & Return Roller Assemblies

Sets conveyor at an 83mm height from the top of the belt:
Model 55 Mounting AngleMounting Angle
Model 55 Return Roller AssemblyReturn Roller Assembly

Side Rails

Model 55 Conveyor Systems Side Rails

Side Rail Options

  • Model 55 Integral Fixed Side Rail

    Integral fixed 16 ga.stainless steel side rail: Available in heights of 13mm up to 76mm tall

  • Model 55 2-Way Side Rail - Flat Tee
    Model 55 2-Way Side Rail - Round Tee

    2way – Up/Down adjustable side rail: Available with round or 1″ Flat Tee face steel backed UHMW

  • Model 55 4-Way Side Rail - Flat Tee
    Model 55 2-Way Side Rail - Round Tee

    4way – Up/Down In/Out adjustable side rail: Available with round or 1″ Flat Tee face steel backed UHMW

Back to Top

Try our new conveyor configurator! Choose your desired conveyor options then download detailed specifications for a conveyor tailored to your specific needs. After you’ve configured your conveyor, you will be able to download a product datasheet in PDF format that includes a live 3D model, product specifications and ordering information for your conveyor. You will also be able to download a working 3D solid model in any of 150 different CAD file formats to incorporate into your machine layout.
Print Friendly, PDF & Email
Share
jQuery.noConflict();